DIY Hanging Epoxy Suncatcher
By: Sarah Spooner
Hi and welcome back to another craft edition blog. In this week's blog we will be talking about how to make a hanging epoxy suncatcher, what will be needed, and some helpful tips. This fun little diy project is the perfect summertime project to do! It's also a fun activity to do with the kids! Hanging suncatchers are a cute fun little thing to spice up your backyard. Let's get started!!
First let's talk about what you will need to do this diy project. You will need silicone mold of your choice. Ekopel 2K or another epoxy of your choice. Stir stick, gloves, paper or plastic furniture covering, popsicle stick, string or ribbon, and any additives or tints you would like to add into the epoxy for a fun look. You can find a lot of silicone molds at your local craft store, Amazon, or online. You can find stir sticks, gloves, popsicle sticks, string, and paper or plastic furniture coverings at your local hardware store or even Walmart. Always remember to take proper precautions when working with epoxy. Ekopel 2K is odorless, and non toxic so there is no need for ventilation. Other epoxies might not be odorless and non toxic so you will want to make sure you take the proper precautions that your epoxy requires to keep you safe.
Now let's talk about setting up. You will want to make sure you set everything up in a nice flow. This will leave less room for errors. If everything is set up then you won't have to go oh no I forgot to... You will want to do this project on a clean flat surface. If the surface is uneven the project can dry uneven as well. If there is dust or wind from a fan then the project can end up with dust and debris or dry with waves. Then you will want to lay out your paper or plastic furniture covering. This will make the clean up a lot easier on yourself. At the end you can just grab the plastic, pick it up and throw it away. Next lay out all the pieces on the table. Silicon mold, tints or additives right beside it. Both parts of epoxy with a stir stick next to it and a pile of gloves to use. Now you are ready to go!!
Lastly, let's talk about how to do this. You will want to mix your epoxy together as the directions state. Remember working with epoxies is like a science, if one thing is off the whole thing can be off. So you will want to make sure you follow your directions to whatever epoxy you have to a T. You can pre add additives in like fake or dried flowers, confetti, etc. Or you can leave it blank up to you. Next pour the epoxy into the silicon mold. Then add any additives or tints you want. You can use a popsicle stick to make a marble or swirl affect. Options are unlimited with how you can design these. Really have fun with this and make it YOU!! Once your done let it sit and dry for 24-36 hours or however long your epoxy states to let dry and harden. Then hang them up and enjoy there beauty!!