Jan 24 , 2023
Order nonslip bathtub surfaces with your refinished bathtub or shower
The surface of a refinished bathtub may be slightly slipperier than the surface of your original bathtub. While we are refinishing or reglazing your bathtubs and showers at Commercial Bath Refinishing, we also provide an additional safety feature in the form of a nonslip surface.
During the process of refinishing, applying a nonslip material (an additive made of silica sand), which will be used to the bottom of the bathtub, will assist in preventing slip and fall dangers. It is strongly suggested that you get this done.
When you get your tub or shower refinished, one thing you need to be aware of is that most bath mats can cause a reaction with the new surface when exposed to hot water, which will lift the coating. This is something that you need to surely keep in mind. Because of the risk of invalidating your warranty, you should avoid using a bathmat equipped with suction cups at all costs.
Nobody wants to trip and fall when they're in the bathtub or the shower, but this is especially crucial for elderly people, as well as when washing your children or pets.
What are some alternatives to having nonslip bathtub surfaces applied to your tub if you don't already have them? There are still three choices available to you that come to mind.
- Before adding water to the bathtub, you should place a bathmat made of fiber down on the floor of the bathroom. (This is the kind of bath mat designed to be laid out on the bathroom floor just outside the shower or tub, and you step out onto it after you've been bathing.) Before placing children or animals into the water, check to see that the mat is firmly affixed to the base of the tub and is lying flat.
- Alternatively, you may do what Is often used and lay a bath towel down on the surface to prevent little children and pets from falling. Because my children were not active while bathing, we were able to use a towel without any problems; nevertheless, not all children can remain still while being washed.
Before you realize it, you can end up with a wet bath towel that is all balled up, and you won't have any protection from slipping.
This is the option people often select as least desirable, but it is probably preferable to having nothing at all until you can locate or acquire something more desirable.
- If you don't have nonslip bathtub surfaces in your tub and/or shower, your best bet is to buy a bath mat specifically designed for refinished or reglazed surfaces, like the one shown below. This is likely to be the best option for you.
Be sure to check for "a bath mat made for refinished and reglazed bathtubs" while you are conducting research either online or by calling local businesses.
What Exactly Is a Coating That Won't Slip?
It shouldn't be too difficult for you to reglaze the floor tiles, bathtub, and shower stall in your bathroom. Because our organization has more than ten years of experience in this sector, you may anticipate receiving results of the highest caliber. But were you aware that we can also play a role in the prevention of accidents? We can assist you in protecting your loved ones from the risk of slipping and falling simply by applying a nonslip coating to places that become slick when they become wet.
The nonslip coating has a surface patterned like a small grid, and it helps reduce accidents involving slipping and falling. It does not have any lead in it and can be cleaned with chemical cleaners. However, it is better to stay away from bleach and other very aggressive substances when cleaning it. Remember that this is not a bath mat, so even the naked eye will have difficulty spotting it.
Will It Come Off Easily?
Reglazing is designed to endure for at least eight years, which many people are unaware of. The anti-slip coating that we use will not flake off, nor will it turn any other color. It can be cleaned in the same manner as the floor tiles, or the bathtub would be cleaned. Having said that, it is important to highlight that the coating is so long-lasting due to the fact that we used agents of professional-grade quality. Take care of it yourself. Kits typically have a shelf life of no more than one or two years before they begin to show signs of degradation. Keep in mind that as soon as the surface begins to deteriorate, it will become slippery again. To always keep your loved ones and yourself safe from harm, you must ensure that the coating remains in pristine condition for as long as possible.
Our anti-slip kit Refined Bath Solutions is proud to provide you with anti-slip kits that are not only easy to use but also economical, all to keep you and your family safe. Continue reading to find out more information!
What exactly constitutes the Nonslip Kit?
The Nonslip Kit consists of ekopel 2k to which a pigment that looks like sand has been added in order to give you a grip. It is not just abrasive enough to provide you traction so that you won't slip and fall, but it is also not so rough that it would cut or damage you if you bathe in it. After the new ekopel surface has had a chance to completely dry, you can either apply the nonslip Kit to the bottom of a standard bathtub floor or put it directly over the new surface.
How coarse is the texture of the Nonslip Kit?
You won't lose your footing because the surface is sufficiently rough. However, it is not sharp enough to cut you, and it will not cause you any harm. You won't have to worry about slipping or falling on this nonslip surface.