Dec 19 , 2022
Resurfacing your bathtub is a great way to restore its beauty without having to replace the tub entirely and go through the painful process of tearing down and building back up your bathroom. Resurfacing is a process in which the original surface of the bathtub is removed, and then a new surface is applied over it. The cracks and chips in the bathtub's surface will be readily repaired by refinishing in Phoenix. Additionally, the stains that you can't seem to get rid of, no matter how hard you scrub, will be concealed, and the color of the bathtub will be permanently altered.
Because bathtub and shower refinishing involve the application of a coating rather than the provision of a permanent surface, you must get familiar with the correct cleaning method to avoid damaging the newly refinished surface. Your refinished tub has the potential to last as long as a brand-new tub with the proper care and cleaning over a period of at least 20 years.
The following are things that can be done to keep your resurfaced bathtub clean and in good condition:
Always opt for gentle cleansers.
Scratching the new surface of your bathtub with abrasive cleaners or scrubbing pads can void your guarantee and will also cause the surface to become damaged. Abrasive cleansers such as Comet and Soft Scrub should be avoided, as should strong chemicals such as ammonia and bleach. These cleaners have the potential to dull, scratch, or peel the paint off the surface. Additionally, they have the potential to dull the surface.
Instead, stick to gentle cleaners like liquid soaps (you may even use dish soap) and products like Bar Keeper's Friend. When you clean, make sure you only wear gentle clothes. Because it is gentle and can also get into the grooves in your tub without harming it, a vehicle wash mitt is a tool you should use to clean it.
After Each and Every Use, Clean Up.
You should clean your bathtub after every use to prevent soap accumulation and stains that need scrubbing, which you are unable to perform. The only thing that is truly necessary to do is to give it a good rinse and then clean it with a fresh cloth. You should clean it with liquid soap around once a week to remove any residue that may be there.
You can reduce the likelihood of mold or mildew growth by using a squeegee to remove any excess water from the bathtub after each use. This will also help to prevent the growth of mold and mildew.
Keep any metal objects out of the bath.
Rust in your bathtub may be caused by metal cans, such as those used for face wash or shaving cream. When you set the can down, the water pools around it, and as a result, rust begins to form on the can, which eventually runs onto the tub's surface. After the rust has formed, you will only be able to scrub it off if you cause the finish on the tub to become damaged.
Keep your tub safe by removing any cans or other things made of metal and storing them somewhere. You can either store them in a nearby cabinet or put them in a caddy or tray made of plastic, wood, or metal that you keep in the shower.
Take Advantage of Non-Stick Mats
Putting a bath mat in the bathtub can help prevent falls, which is especially important if you have kids in the house. If you decide to use one of these mats, examine it carefully to ensure that it does not have any suction cups attached.
When the mat is removed, the suction might rip the finish off the tub. The suction can also keep the mat close to the tub, which can trap water and allow mold and mildew to form. In addition, the suction could successfully keep the mat in place. Once mold or mildew has taken hold in your tub, cleaning it without causing irreparable damage to the surface will be extremely difficult.
Towels and bathmats should not be hung to dry over the side of the tub under any circumstances. Mold can begin to grow as a result of the water's presence.
Keep Your Animals Out of the Bathtub!
The finish on your bathtub can be damaged by pets, leaving behind unattractive hair and other debris that can accumulate on the surface. If you intend to wash your pets in the comfort of your own home, you need either invest in a pet bathtub designed just for them or take them outdoors to be washed with the garden hose. If you bathe them indoors, you will merely create a mess and risk damaging your bathtub.
If you take all of the essential precautions with your newly refinished bathtub, you may get the same amount of use out of it as you would from a brand-new one. You will be able to take immense pleasure in the aesthetic value of your new tub for a substantially longer period of time if you perform a tiny amount of preventative maintenance right now. This will save you a large amount of time and money in the long run.
Customers can expect our business to give our Ekopel Finish Scrubbing Bubbles and Tilex products our highest possible recommendation. The magic eraser is also useful for additional rounds of thorough cleaning. Utilizing a cleaning solution that does not contain abrasives and is suitable for use on acrylic is your best bet.
Over the long term, we advise applying a shining coat with our Bathtub Wax every four months. This makes it easier to keep the tub clean and eliminates the need for vigorous scrubbing, which eventually causes the sheen to become dull.
After waiting 14 days after coloring your hair with the product, you are free to color your hair in the bathtub again. However, to prevent the colorant from penetrating the bathtub material, you must wash it as soon as possible after using it.
