Dec 23 , 2022
Even though high-tech, modern bathrooms are becoming increasingly fashionable, there is still a strong appreciation for traditional bathroom fixtures. Even in the restroom, some homeowners want their houses to have the appearance and atmosphere of a contemporary era. Others make an effort to reimagine trends from the past by installing antique bathroom fixtures to produce something modern and up-to-date while still paying homage to a bygone era.
Spending a lot of money on reproductions of vintage plumbing fixtures, including bathtubs, toilets, and sinks, is possible. To add insult to injury, removing the bathtub is also expensive. Refinishing your current tub is one of the most cost-effective replacement options, and it is also the greatest method to maintain the authentic appearance of an antique in your bathroom.
Refinishing solutions have the ability to take an outdated and broken bathtub and turn it into a glittering work of beauty. Reglazing and refinishing a bathtub is an effective way to repair chips, cracks, and other types of damage to the surface. It is also possible, with the help of refinishing services, to turn back the process of discoloration or totally alter the color of an outdated and worn-out tub.
What Goes Into the Process of Refinishing a Bathtub Professionally?
Suppose you decide to have a professional refinish your bathtub. In that case, the process involves first peeling away and removing the damaged and worn-out layer and then replacing it with a bright, smooth, and uniform surface. This gives your bathtub a more modern appearance. Refinishing a bathtub can be done on bathtubs with a variety of surfaces, including porcelain, acrylic, ceramic, and fiberglass.
The procedure of refinishing a bathtub typically entails the following three steps:
The first thing that needs to be worked towards is a comprehensive pre-treatment on the surface, which involves cleaning it with specific chemicals. During this phase of the cleaning process, the technician works diligently, applying a variety of chemicals all over the surface area of the tub to remove any soap scum, human body oils, hard water build-up, and other substances that may have accumulated on the exterior of the tub throughout its use.
It is imperative that all limescale and soap scum be removed. Scrubbing with Lysol power toilet cleanser is what we suggest using to accomplish this goal. In the event that the cleaner does not remove the limescale completely, the residue that is left should be removed using sandpaper. Silicone needs to be eliminated in its entirety. If the material is placed on a surface that has not had the silicone removed, there is a possibility that the material will peel off.
When the chemical cleaning process is finished, the surface must be prepared to receive the new coatings by having a smooth finish applied to it beforehand. The service technician removes the previous finish, and any chips, cracks, holes, or rust spots that are present are repaired. The bathtub is subsequently sanded down, resulting in a uniformly smooth surface. The portions that do not require refinishing are meticulously veiled to avoid any potential damage caused by overspray.
If your tub's surface has any sort of chips, you will need to fill them with either epoxy or Bondo filler (purchased separately in any DIY store). Sandpaper should always be used to smooth the area after the epoxy or Bondo has had time to dry. Sandpaper with a grit range of 220-320 should be used to make the device feel smooth to the touch. Sand it quickly, even if it's already smooth. After that, you will need to etch the bowl thoroughly with Lysol Power or any other toilet bowl cleaner that contains hydrochloric acid. This will etch the surface and give it a thorough cleaning. You can get a more even surface by using automotive Bondo to patch up any cracks, chips, holes, dents, or pitted areas and then sand the area smoothly.
The process of spraying and applying
The third step is to apply a number of coats of primer, sealer, and coating in successive layers. Spraying each of them with great care one after the other by the experienced professional until the surface of the tub has attained the desired thickness and shining appearance.
The bathtub's surface will receive a generous application of polish during the last process, which will be performed by an experienced refinisher. This will not only make the surface of the bathtub more resilient but also give it a gorgeous shine, which will allow you to take pleasure in it for many years to come.
You will need our 2-pack kit to do the work on the interior and exterior of a clawfoot tub. Use one gallon on one side, wait for it to completely dry, flip it over and use the other gallon on the other side. If all you wanted to do were the inside, you wouldn't need anything more than the 1-gallon kit. Get in touch with Refinished Bathtub Solutions if you are interested in Ekopel Kits. Made in the USA, safe for the environment, and non-toxic: Ekopel's long-lasting glaze is oil-free and doesn't contain any dangerous ingredients; it also emits no fumes and never peels! Tub surfaces can be brought back to a "like new" dazzling luster using this product's thick, full-seal coating.
We highly recommend utilizing Primers in areas with serious rust, regions that have been repaired with Bondo, or simply for added precaution. Primers can be purchased at any hardware store. The utilization of the primer will result in the formation of a bond that is robust and long-lasting. Remember that a little surely goes a long way; the 5-ounce container will be more than enough for a bathtub and surround unit. This is a key point to keep in mind.
It is vital to either patch any leaks that may present or turn off the water supply to prevent water from gathering on the bathtub's surface while it is being worked on and dried. This will ensure that water does not collect on the surface of the bathtub.