Tub Cast Wipe On Bonding Primer is great to use on refinishing your tubs, showers, surroundings, tiles, sinks, and counter tops. You do not have to use the primer in order to refinish your projects, but it is helpful. Our bonding primer will help Ekopel 2K or Counter Cast 2K stick better and prevents peeling. But the primer is not needed because Ekopel 2K and Counter Cast 2K will stick fine on there own. And with proper prep ekopel 2K and Counter Cast 2K won't peel or chip. We would recommend using the primer on projects that you had to fix something with caulking or car bondo. It's also great for rusted areas, pitted areas or stripped areas. You can also use it just cause you want a better bond or stick. By using the primer on these areas it will ensure that Ekopel 2K or Counter Cast 2K will stick great and won't peel.
Gloves are recommended when using our Tub Cast Wipe On Bonding Primer. Apply Tub Cast Wipe On Bonding Primer to a clean surface. You'll want to apply it with a lint free cloth. Make sure you have completely covered all surfaces of your project with our bonding primer. Next wait 20-30 minutes before applying a topcoat over the the bonding primer. Something you'll want to keep in mind while using this product is, this product will remain slightly wet when applying your top coat over the bonding primer. Our bonding primer is a great add on product, that you can use on lots of great refinishing projects. Now you know all about our Tub Cast Wipe On Bonding Primer, how do you primer?!
Leave a comment